Search

Site Map

Home > Fax > Receive a Fax > Receive Mode Settings > Choose the Correct Receive Mode

Choose the Correct Receive Mode

Related Models:MFC‑T810W / MFC‑T910DW
You must choose a Receive Mode depending on the external devices and telephone services you have on your line.

By default, your machine automatically will receive any faxes that are sent to it. The diagram below will help you select the correct mode.

image

MFC-T810W

  1. Press Menu.
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Setup Receive]. Press OK.
    3. Select [Receive Mode]. Press OK.
      image

      (For some countries)

      If you cannot change the [Receive Mode] option, make sure the Distinctive Ring feature is set to [Off].

  3. Press image or image to select the [Fax Only], [Fax/Tel], [External TAD], or [Manual] option, and then press OK.
  4. Press Stop/Exit.

MFC-T910DW

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Setup Receive]. Press OK.
    3. Select [Receive Mode]. Press OK.
      image

      (For some countries)

      If you cannot change the [Receive Mode] option, make sure the Distinctive Ring feature is set to [Off].

  3. Press image or image to select the [Fax Only], [Fax/Tel], [External TAD], or [Manual] option, and then press OK.
  4. Press Stop/Exit.
Related Information
Was this page helpful?

Yes

No

find moreaccept