Search

Site Map

Home > Copy > Copy an ID Card

Copy an ID Card

Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original card size.
image

  • Make sure the paper size is set to A4 or Letter.

  • You may copy an identification card to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide.

DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W

  1. Place your identification card face down near the upper-left corner of the scanner glass.
    image
    1. 3 mm or greater (top, left)
    2. 207 mm
    3. 145 mm
    4. Scannable area
  2. (MFC-T810W) Press image (COPY).
  3. Enter the number of copies in one of the following ways:
    • (DCP-T510W/DCP-T710W) Press image or image on the control panel.
    • (MFC-T810W) Enter the number of copies using the dial pad.
    • (DCP-T310) Press Number of Copies repeatedly.
  4. Press Options or Copy / Scan Options and image or image to select [Layout(2in1 ID)]. Press OK.
  5. Press image or image to select [2in1(ID)]. Press OK.
  6. Press Mono Start or Colour Start.
    The machine starts scanning one side of the identification card.
  7. After the machine has scanned the first side, turn over the identification card and press Mono Start or Colour Start to scan the other side.

MFC-T910DW

  1. Place your identification card face down near the upper-left corner of the scanner glass.
    image
    1. 3 mm or greater (top, left)
    2. 207 mm
    3. 145 mm
    4. Scannable area
  2. Press image (COPY).
  3. Enter the number of copies using the dial pad.
  4. Press image or image to select the following:
    1. Select [Page Layout]. Press OK.
    2. Select [2in1(ID)]. Press OK.
  5. Press Mono Start or Colour Start.
    The machine starts scanning one side of the identification card.
  6. After the machine has scanned the first side, turn over the identification card and press image to scan the other side.
Related Information
Was this page helpful?

Yes

No

find moreaccept