ImproveQuality

-

Check and correct the print quality, alignment and paper feeding according to the LCD instructions.

Cleaning

-

Clean the print head according to the LCD instructions.

Clean Roller

(available only for some countries)

-

Clean the rollers according to the LCD instructions.

InkBottleModel

-

Check the ink bottle numbers.

Print Setting

ReduceSmudging

Reduce smudging on the paper or paper jams during printing.

Slow Drying

Use this setting when printing with a type of plain paper on which the ink dries very slowly.

Ink Low Notice

-

Set the machine to display the ink low messages.

Mode Timer

(MFC-T810W)

-

Set the amount of time before the machine returns to Home screen.

Tray Setting

(DCP-T510W/DCP-T710W/MFC-T810W)

Paper Type

Set the type of paper in the paper tray.

Paper Size

Set the size of paper in the paper tray.

Check Paper

Check the paper type and paper size when you pull the tray out of the machine.

Volume

(MFC-T810W)

Ring

Adjust the ring volume.

Beep

(MFC-T810W)

Adjust the beeper volume.

Speaker

(MFC-T810W)

Adjust the speaker volume.

Ecology

Sleep Mode

Select how long the machine must be idle before it goes into Sleep Mode.

Quiet Mode

Decrease printing noise.

Auto Power Off

Select how long the machine must wait before it automatically turns itself off after entering Sleep Mode.

When set to Off, the machine will not power off automatically.

LCD Contrast

-

Adjusts the contrast of the LCD.

Security

(MFC-T810W)

TX Lock

Prohibit most functions except receiving faxes.

Setup Receive

Receive Mode

Select the Receive Mode that best suits your needs.

Ring Delay

Set the number of rings before the machine answers in Fax Only or Fax/Tel mode.

F/T Ring Time

Set the length of the pseudo/double-ring time in Fax/Tel mode.

Fax Detect

Receive fax messages automatically when you answer a call and hear fax tones.

Remote Codes

Answer calls at an extension or external telephone and use codes to turn the Remote Codes on or off. You can personalise the codes.

Auto Reduction

Reduce the size of incoming faxes.

PC Fax Receive

Set the machine to send faxes to your computer.

You can turn on the Backup Print safety feature.

Fax Rx Stamp

Print the received time and date on the top of received faxes.

Setup Send

Fax Resolution

Set the resolution for outgoing faxes.

Contrast

Adjust the contrast.

Glass ScanSize

Adjust the scan area of the scanner glass to the size of the document.

Real Time TX

Send a fax without using the memory.

Overseas Mode

Set to On if you have difficulty sending faxes overseas.

Auto Redial

Set the machine to redial the last fax number if the fax did not go through because the line was busy.

Report Setting

XMIT Report

Select the initial setup for the Transmission Verification Report.

Journal Period

Set the interval for automatic printing of the Fax Journal.

If you select an option other than Off and Every 50 Faxes, you can set the time for the option.

If you select Every 7 Days, you can set the day of the week.

Remaining Jobs

-

Check which scheduled jobs are in the machine's memory and cancel selected jobs.

Miscellaneous

Distinctive

(available only for some countries)

Turn on the telephone company's Distinctive Ring subscriber service to register your new ring pattern on the machine.

Density

Adjust the density.

Quality

Select the Copy resolution for your document type.

Wired LAN

(MFC-T810W)

TCP/IP

BOOT Method

Select the Boot method that best suits your needs.

IP Address

(MFC-T810W)

Enter the IP address.

Subnet Mask

(MFC-T810W)

Enter the Subnet mask.

Gateway

(MFC-T810W)

Enter the Gateway address.

Node Name

(MFC-T810W)

Enter the Node name.

WINS Config

(MFC-T810W)

Select the WINS configuration mode.

WINS Server

(MFC-T810W)

Specify the IP address of the primary or secondary WINS server.

DNS Server

(MFC-T810W)

Specify the IP address of the primary or secondary DNS server.

APIPA

(MFC-T810W)

Set the machine to allocate the IP address from the link-local address range automatically.

IPv6

(MFC-T810W)

Turn the IPv6 protocol on or off.

Ethernet

(MFC-T810W)

-

Select the Ethernet link mode.

Wired Status

(MFC-T810W)

-

View the current wired status.

MAC Address

(MFC-T810W)

-

View the machine's MAC address.

WLAN

TCP/IP

BOOT Method

Select the Boot method that best suits your needs.

IP Address

Enter the IP address.

Subnet Mask

Enter the Subnet mask.

Gateway

Enter the Gateway address.

Node Name

Enter the Node name.

WINS Config

Select the WINS configuration mode.

WINS Server

Specify the IP address of the primary or secondary WINS server.

DNS Server

Specify the IP address of the primary or secondary DNS server.

APIPA

Set the machine to allocate the IP address from the link-local address range automatically.

IPv6

Turn the IPv6 protocol on or off.

Setup Wizard

-

Configure your wireless network settings manually.

WLAN Assistant

-

Configure your wireless network settings using the Brother installation disc.

WPS

-

Configure your wireless network settings using the one-button push method.

WPS w/PIN Code

-

Configure your wireless network settings using WPS with a PIN.

WLAN Status

Status

View the current wireless network status.

Signal

View the current wireless network signal strength.

SSID

View the current SSID.

Comm. Mode

View the current Communication mode.

MAC Address

-

View the machine's MAC address.

Wi-Fi Direct

Push Button

-

Configure your Wi-Fi Direct network settings using the one-button push method.

PIN Code

-

Configure your Wi-Fi Direct network settings using WPS with a PIN code.

Manual

-

Configure your Wi-Fi Direct network settings manually.

Group Owner

-

Set your machine as the Group Owner.

Device Info.

Device Name

View your machine's device name.

SSID

View the Group Owner's SSID.

When the machine is not connected, the LCD displays Not Connected.

IP Address

View your machine's current IP Address.

Status Info.

Status

View the current Wi-Fi Direct network status.

Signal

View the current Wi-Fi Direct network signal strength.

When your machine acts as Group Owner, the LCD always indicates a strong signal.

Channel

Display the channel in use when the Wi-Fi Direct network is active.

Speed

Display the connection speed when the Wi-Fi Direct network is active.

I/F Enable

-

Turn the Wi-Fi Direct connection on or off.

Network I/F

(MFC-T810W)

-

-

Select the network connection type.

WLAN Enable

(DCP-T510W/DCP-T710W)

-

-

Turn wireless network connection On or Off.

Network Reset

-

-

Restore all network settings back to the factory settings.

XMIT Verify

(MFC-T810W)

Print a Transmission Verification Report for your last transmission.

Address Book

(MFC-T810W)

Print a list of names and numbers stored in the Address Book.

Fax Journal

(MFC-T810W)

Print a list of information about your last 200 incoming and outgoing faxes.

(TX means Transmit. RX means Receive.)

User Settings

Print a list of your settings.

Network Config

(DCP-T510W/DCP-T710W/MFC-T810W)

Print a list of your Network settings.

WLAN Report

(DCP-T510W/DCP-T710W/MFC-T810W)

Print the wireless LAN connection results.

Caller ID

(MFC-T810W)

(Not available for Taiwan and some countries)

Print a list of the available Caller ID information about the last 20 received faxes and telephone calls.

Date&Time

Date&Time

(MFC models)

Add the date and time on the screen and in the headings of the faxes you send.

(DCP models)

Set the date and time on your machine.

Auto Daylight

(MFC-T810W)

(Available only for some countries.)

Set the machine to change automatically for Daylight Saving Time.

Daylight Save

(MFC-T810W)

(Available only for some countries.)

Change for Daylight Saving Time manually.

Station ID

(MFC-T810W)

-

Enter your name and fax number so it appears on each page you fax.

Tone/Pulse

(MFC-T810W)

(Available only for some countries.)

-

Select the dialling mode.

Dial Tone

(MFC-T810W)

-

Shorten the dial tone detect pause.

Phone Line Set

(MFC-T810W)

(Available only for some countries.)

-

Select the telephone line type.

Compatibility

(MFC-T810W)

-

Adjust the equalisation for transmission difficulties.

VoIP service providers offer fax support using various standards. If you regularly experience fax transmission errors, select Basic (for VoIP).

Reset

Machine Reset

Restore all the machine's settings that you have changed, such as Date and Time and Ring Delay.

Network Reset

(DCP-T510W/DCP-T710W/MFC-T810W)

Restore all network settings back to the factory settings.

Address & Fax

(MFC-T810W)

Erase all stored phone numbers and fax settings.

All Settings

Restore all the machine's settings back to the factory settings.

Local Language

(Available only for some countries.)

-

Change your LCD language.