Search

Site Map

Home > Network > Advanced Network Features > Print the Network Configuration Report

Print the Network Configuration Report

Related Models:DCP‑T510W / DCP‑T710W / MFC‑T810W / MFC‑T910DW
The Network Configuration Report lists the network configuration, including the network print server settings.
image
  • Node Name: The Node Name appears on the current Network Configuration Report. The default Node Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where "xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.)
  • If the [IP Address] on the Network Configuration Report shows 0.0.0.0, wait for one minute and try printing it again.
  • You can find your machine's settings, such as the IP address, subnet mask, node name, and MAC Address on the report, for example:
    • IP address: 192.168.0.5
    • Subnet mask: 255.255.255.0
    • Node name: BRN000ca0000499
    • MAC Address: 00-0c-a0-00-04-99

DCP-T510W/DCP-T710W/MFC-T810W

  1. Press Menu.
  2. Press image or image to select the [Print Reports] option, and then press OK.
  3. Press image or image to select the [Network Config] option, and then press OK.
  4. Press the Mono Start or Colour Start button.
    The machine prints the current Network Configuration Report.

MFC-T910DW

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [Print Reports]. Press OK.
    2. Select [Network Config]. Press OK.
  3. Press image.
    The machine prints the current Network Configuration Report.
Related Information
Was this page helpful?

Yes

No

find moreaccept