Home > Fax > Send a Fax > Send the Same Fax to More than One Recipient (Broadcasting)
Send the Same Fax to More than One Recipient (Broadcasting)
- This feature is available only for black and white faxes.
- Address Book numbers must be stored in the machine’s memory before they can be used in a broadcast.
- Group numbers must also be stored in the machine’s memory before they can be used in a broadcast. Group numbers include many stored Address Book numbers for easier dialing.
MFC-T810W
You can include Groups, Address Book numbers and up to 50 manually-dialed numbers in the same broadcast.
If you did not use any of the Address Book numbers for Groups, you can broadcast faxes to as many as 90 different numbers.
- Load your document in the ADF or place it on the scanner glass.
- Press (FAX).
- Enter a fax number. Press OK.Repeat this step until you have entered all the fax numbers to be included in the broadcast.
- Press Inicio Negro (Black Start).
- Do one of the following:
- If you are using the ADF, the machine starts scanning and sending the document.
- If you are using the scanner glass, the machine starts scanning the first page.
When the LCD displays [Next Page?], do one of the following:
- Press to scan another page. Place the next page on the scanner glass, and then press OK. The machine starts scanning the page.
Repeat this step for each additional page.
- Press to send a fax (or press Inicio Negro (Black Start) again) when finished scanning pages. The machine starts sending the document.
- You can broadcast to a Speed Dial number, a Group, or a fax number entered on the dial pad.
- If the [Out of Memory] message appears, press Detener/Salir (Stop/Exit) to cancel.
MFC-T910DW
You can include Groups, Address Book numbers and up to 50 manually-dialed numbers in the same broadcast.
If you did not use any of the Address Book numbers for Groups, you can broadcast faxes to as many as 90 different numbers.
- Load your document.
- Press (FAX).
- Press or to select [Broadcasting] and then press OK.
- Press or to select [Add Number] and then press OK.
- You can add numbers to the broadcast in the following ways:
- Enter a number using the dial pad:
- Press or to select [Add Number], and then press OK.
- Enter a number using the dial pad, and then press OK.
- Select a number from the Address Book:
- Press or to select [Add from Address book], and then press OK.
- Press or to select [Alphabetical Order] or [Numerical Order], and then press OK.
- Press or to select the Speed Dial name or number you want.
- Press or to select the check box labeled with the Speed Dial name or number, and then press OK.
- Search a number in the Address Book:
- Press or to select [Search in Address book], and then press OK.
- Press the first letter of the name using the dial pad, and then press OK.
- Press or to select the name, and then press OK.
- Press OK again.
- When finished, press or to select [Complete]. Press OK.
- Press Inicio Negro (Black Start).
- Do one of the following:
- If you are using the ADF, the machine starts scanning and sending the document.
- If you are using the scanner glass, the machine starts scanning the first page.
When the LCD displays [Next page?], do one of the following:
- Press to scan another page. Place the next page on the scanner glass, and then press . The machine starts scanning the page.
Repeat this step for each additional page.
- Press to send a fax when finished scanning pages. The machine starts sending the document.
If the [Out of Memory] message appears, press Detener/Salir (Stop/Exit) to cancel.