Search

Site Map

Home > Fax > Receive a Fax > Receive Mode Settings > Set the Number of Rings Before the Machine Answers (Ring Delay)

Set the Number of Rings Before the Machine Answers (Ring Delay)

Related Models:MFC‑T810W / MFC‑T910DW
When somebody calls your machine, you will hear the normal telephone ring sound. The number of rings is set in the Ring Delay option.
  • The Ring Delay setting sets the number of times the machine rings before it answers in [Fax Only] and [Fax/Tel] modes.
  • If you have external or extension telephones on the same line as the machine, keep the Ring Delay setting of [4].

MFC-T810W

  1. Press Menú (Menu).
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Setup Receive]. Press OK.
    3. Select [Ring Delay]. Press OK.
    4. Select the number of times you want the line to ring before the machine answers (0, 1, 2, 3, or 4). Press OK.
      image
      • If you select [0], the machine will answer immediately and the line will not ring at all (available only for some countries).
  3. Press Detener/Salir (Stop/Exit).

MFC-T910DW

  1. Press Ajustes (Settings).
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Setup Receive]. Press OK.
    3. Select [Ring Delay]. Press OK.
    4. Select the number of times you want the line to ring before the machine answers (0, 1, 2, 3, or 4). Press OK.
      image
      • If you select [0], the machine will answer immediately and the line will not ring at all (available only for some countries).
  3. Press Detener/Salir (Stop/Exit).
Related Information
Was this page helpful?

Yes

No

find moreaccept