Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (1 Line LCD)
Settings Tables (1 Line LCD)
These tables will help you understand your machine's menu selections and options.
Menú (Menu) > [Maintenance]
Level 1 | Level 2 | Descriptions |
---|---|---|
ImproveQuality | - | Check and correct the print quality, alignment and paper feeding according to the LCD instructions. |
Cleaning | - | Clean the print head according to the LCD instructions. |
InkBottleModel | - | Check the ink bottle numbers. |
Print Setting | ReduceSmudging | Reduce smudging on the paper or paper jams during printing. |
Slow Drying | Use this setting when printing with a type of plain paper on which the ink dries very slowly. | |
Ink Low Notice | - | Set the machine to display the ink low messages. |
Menú (Menu) > [General Setup]
Level 1 | Level 2 | Descriptions |
---|---|---|
Mode Timer (MFC-T810W) | - | Set the amount of time before the machine returns to Home screen. |
Tray Setting (DCP-T510W/DCP-T710W/MFC-T810W) | Paper Type | Set the type of paper in the paper tray. |
Paper Size | Set the size of paper in the paper tray. | |
Check Paper | Check the paper type and paper size when you pull the tray out of the machine. | |
Volume (MFC-T810W) | Ring | Adjust the ring volume. |
Beep (MFC-T810W) | Adjust the beeper volume. | |
Speaker (MFC-T810W) | Adjust the speaker volume. | |
Ecology | Sleep Mode | Select how long the machine must be idle before it goes into Sleep Mode. |
Quiet Mode | Decrease printing noise. | |
Auto Power Off | Select how long the machine must wait before it automatically turns itself off after entering Sleep Mode. When set to Off, the machine will not power off automatically. | |
LCD Contrast | - | Adjusts the contrast of the LCD. |
Security (MFC-T810W) | TX Lock | Prohibit most functions except receiving faxes. |
Menú (Menu) > [Fax] (MFC-T810W)
Level 1 | Level 2 | Descriptions |
---|---|---|
Setup Receive | Receive Mode | Select the Receive Mode that best suits your needs. |
Ring Delay | Set the number of rings before the machine answers in Fax Only or Fax/Tel mode. | |
F/T Ring Time | Set the length of the pseudo/double-ring time in Fax/Tel mode. | |
Easy Receive | Receive fax messages automatically when you answer a call and hear fax tones. | |
Remote Codes | Answer calls at an extension or external telephone and use codes to turn on or off the Remote Codes. You can personalize the codes. | |
Auto Reduction | Reduce the size of incoming faxes. | |
PC Fax Receive | Set the machine to send faxes to your computer. You can turn on the Backup Print safety feature. | |
Fax Rx Stamp | Print the received time and date on the top of received faxes. | |
Setup Send | Fax Resolution | Set the resolution for outgoing faxes. |
Contrast | Adjust the contrast. | |
Glass ScanSize | Adjust the scan area of the scanner glass to the size of the document. | |
Real Time TX | Send a fax without using the memory. | |
Overseas Mode | Set to On if you have difficulty sending faxes overseas. | |
Auto Redial | Set the machine to redial the last fax number if the fax did not go through because the line was busy. | |
Report Setting | Transmission | Select the initial setup for the Transmission Verification Report. |
Journal Period | Set the interval for automatic printing of the Fax Journal. If you select an option other than Off and Every 50 Faxes, you can set the time for the option. If you select Every 7 Days, you can set the day of the week. | |
Remaining Jobs | - | Check which scheduled jobs are in the machine's memory and cancel selected jobs. |
Miscellaneous | Distinctive (available only for some countries) | Turn on the telephone company's Distinctive Ring subscriber service to register your new ring pattern on the machine. |
Menú (Menu) > [Copy]
Level 1 | Descriptions |
---|---|
Density | Adjust the density. |
Quality | Select the Copy resolution for your document type. |
Menú (Menu) > [Network] (DCP-T510W/DCP-T710W/MFC-T810W)
Level 1 | Level 2 | Level 3 | Descriptions |
---|---|---|---|
Wired LAN (MFC-T810W) | TCP/IP | BOOT Method | Select the Boot method that best suits your needs. |
IP Address (MFC-T810W) | Enter the IP address. | ||
Subnet Mask (MFC-T810W) | Enter the Subnet mask. | ||
Gateway (MFC-T810W) | Enter the Gateway address. | ||
Node Name (MFC-T810W) | Enter the Node name. | ||
WINS Config (MFC-T810W) | Select the WINS configuration mode. | ||
WINS Server (MFC-T810W) | Specify the IP address of the primary or secondary WINS server. | ||
DNS Server (MFC-T810W) | Specify the IP address of the primary or secondary DNS server. | ||
APIPA (MFC-T810W) | Set the machine to allocate the IP address from the link-local address range automatically. | ||
IPv6 (MFC-T810W) | Turn the IPv6 protocol on or off. | ||
Ethernet (MFC-T810W) | - | Select the Ethernet link mode. | |
Wired Status (MFC-T810W) | - | View the current wired status. | |
MAC Address (MFC-T810W) | - | View the machine's MAC address. | |
WLAN | TCP/IP | BOOT Method | Select the Boot method that best suits your needs. |
IP Address | Enter the IP address. | ||
Subnet Mask | Enter the Subnet mask. | ||
Gateway | Enter the Gateway address. | ||
Node Name | Enter the Node name. | ||
WINS Config | Select the WINS configuration mode. | ||
WINS Server | Specify the IP address of the primary or secondary WINS server. | ||
DNS Server | Specify the IP address of the primary or secondary DNS server. | ||
APIPA | Set the machine to allocate the IP address from the link-local address range automatically. | ||
IPv6 | Turn the IPv6 protocol on or off. | ||
Setup Wizard | - | Configure your wireless network settings manually. | |
WLAN Assistant | - | Configure your wireless network settings using the Brother installation disc. | |
WPS | - | Configure your wireless network settings using the one-button push method. | |
WPS w/PIN Code | - | Configure your wireless network settings using WPS with a PIN. | |
WLAN Status | Status | View the current wireless network status. | |
Signal | View the current wireless network signal strength. | ||
SSID | View the current SSID. | ||
Comm. Mode | View the current Communication mode. | ||
MAC Address | - | View the machine's MAC address. | |
Wi-Fi Direct | Push Button | - | Configure your Wi-Fi Direct network settings using the one-button push method. |
PIN Code | - | Configure your Wi-Fi Direct network settings using WPS with a PIN code. | |
Manual | - | Configure your Wi-Fi Direct network settings manually. | |
Group Owner | - | Set your machine as the Group Owner. | |
Device Info. | Device Name | View your machine's device name. | |
SSID | View the Group Owner's SSID. When the machine is not connected, the LCD displays Not Connected. | ||
IP Address | View your machine's current IP Address. | ||
Status Info. | Status | View the current Wi-Fi Direct network status. | |
Signal | View the current Wi-Fi Direct network signal strength. When your machine acts as Group Owner, the LCD always indicates a strong signal. | ||
Channel | Display the channel in use when the Wi-Fi Direct network is active. | ||
Speed | Display the connection speed when the Wi-Fi Direct network is active. | ||
I/F Enable | - | Turn the Wi-Fi Direct connection on or off. | |
Network I/F (MFC-T810W) | - | - | Select the network connection type. |
WLAN Enable (DCP-T510W/DCP-T710W) | - | - | Turn wireless network connection On or Off. |
Network Reset | - | - | Restore all network settings back to the factory settings. |
Menú (Menu) > [Print Reports]
Level 1 | Descriptions |
---|---|
Transmission (MFC-T810W) | Print a Transmission Verification Report for your last transmission. |
Address Book (MFC-T810W) | Print a list of names and numbers stored in the Address Book. |
Fax Journal (MFC-T810W) | Print a list of information about your last 200 incoming and outgoing faxes. (TX means Transmit. RX means Receive.) |
User Settings | Print a list of your settings. |
Network Config (DCP-T510W/DCP-T710W/MFC-T810W) | Print a list of your Network settings. |
WLAN Report (DCP-T510W/DCP-T710W/MFC-T810W) | Print the wireless LAN connection results. |
Caller ID (MFC-T810W) | Print a list of the available Caller ID information about the last 20 received faxes and telephone calls. |
Menú (Menu) > [Machine Info.]
Level 1 | Descriptions |
---|
Serial No. | Check your machine's serial number. |
Version | Check your machine's firmware version. |
Page Counter | Display the printed pages. |
Menú (Menu) > [Initial Setup]
Level 1 | Level 2 | Descriptions |
---|---|---|
Date&Time | Date&Time | (MFC models) Add the date and time on the screen and in the headings of the faxes you send. (DCP models) Set the date and time on your machine. |
Auto Daylight (MFC-T810W) (USA and Canada only) | Set the machine to change automatically for Daylight Saving Time. | |
Station ID (MFC-T810W) | - | Enter your name and fax number so it appears on each page you fax. |
Tone/Pulse (MFC-T810W) (Available only for some countries.) | - | Select the dialing mode. |
Dial Tone (MFC-T810W) | - | Shorten the dial tone detect pause. |
Compatibility (MFC-T810W) | - | Adjust the equalization for transmission difficulties. VoIP service providers offer fax support using various standards. If you regularly experience fax transmission errors, select Basic (for VoIP). |
Reset | Machine Reset | Restore all the machine's settings that you have changed, such as Date and Time and Ring Delay. |
Network Reset (DCP-T510W/DCP-T710W/MFC-T810W) | Restore all network settings back to the factory settings. | |
Address & Fax (MFC-T810W) | Erase all stored phone numbers and fax settings. | |
All Settings | Restore all the machine's settings back to the factory settings. | |
Local Language (Available only for some countries.) | - | Change your LCD language. |