Search

Site Map

Home > Paper Handling > Load Paper > Paper Settings > Change the Check Paper Size Setting

Change the Check Paper Size Setting

Related Models:DCP‑T510W / DCP‑T710W / MFC‑T810W / MFC‑T910DW
If the Check Paper setting is set to [On] and you pull the paper tray out of the machine or load paper in the MP Tray, the LCD displays a message asking if you want to change the Paper Size and Paper Type settings.

The default setting is [On].

DCP-T510W/DCP-T710W/MFC-T810W

  1. Press Menú (Menu).
  2. Press image or image to select the following:
    1. Select [General Setup]. Press OK.
    2. Select [Tray Setting]. Press OK.
    3. Select [Check Paper]. Press OK.
    4. Select [On] (or [Off]). Press OK.
  3. Press Detener/Salir (Stop/Exit).

MFC-T910DW

  1. Press Ajustes (Settings).
  2. Press image or image to select the following:
    1. Select [General Setup]. Press OK.
    2. Select [Tray Setting]. Press OK.
    3. Select [Check Paper]. Press OK.
    4. Select [On] or [Off]. Press OK.
  3. Press Detener/Salir (Stop/Exit).
Related Information
Was this page helpful?

Yes

No

find moreaccept