Search

Site Map

Set the Date and Time

(MFC models)

The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to each fax you send by setting your Station ID.

(DCP models)

If the machine's power has been off, the machine's date and time may not be current. Re-enter them.

DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W

  1. Press Menú (Menu).
  2. Press image or image to select the following:
    1. Select [Initial Setup]. Press OK.
    2. Select [Date&Time]. Press OK.
    3. Select [Date&Time]. Press OK.
  3. Enter the digits for the date in one of the following ways:
    • Press image or image on the control panel to set the last two digits of the year. Press OK. Repeat these steps for setting the month and day. (DCP-T310/DCP-T510W/DCP-T710W)
    • Enter the last two digits of the year using the dial pad, and then press OK. Repeat these steps for setting the month and day. (MFC-T810W)
  4. Press image or image to select [12h Clock] or [24h Clock], and then press OK.

    (Not available in Latin American countries)

  5. Enter the digits for the time in one of the following ways:
    • If you selected [12h Clock]:

      (Not available in Latin American countries)

      • Press image or image on the control panel to set the hour. Press OK. Repeat these steps for setting the minute. (DCP-T310/DCP-T510W/DCP-T710W)
      • Enter the time (in 12-hour format) using the dial pad, and then press OK. (MFC-T810W)
      • Press image or image to select [AM] or [PM], and then press OK.

    • If you selected [24h Clock]:

      • Press image or image on the control panel to set the hour. Press OK. Repeat these steps for setting the minute. (DCP-T310/DCP-T510W/DCP-T710W)
      • Enter the time (in 24-hour format) using the dial pad, and then press OK. (MFC-T810W)

  6. Press Detener/Salir (Stop/Exit).

MFC-T910DW

  1. Press Ajustes (Settings).
  2. Press image or image to select the following:
    1. Select [Initial Setup]. Press OK.
    2. Select [Date & Time]. Press OK.
    3. Select [Date]. Press OK.
  3. Enter the last two digits of the year using the dial pad, and then press OK.
  4. Enter the two digits for the month using the dial pad, and then press OK.
  5. Enter the two digits for the day using the dial pad, and then press OK.
  6. Press image or image to select [Clock Type], and then press OK.

    (Not available in Latin American countries)

  7. Press image or image to select [12h Clock] or [24h Clock], and then press OK.

    (Not available in Latin American countries)

  8. Press image or image to select [Time], and then press OK.
  9. To enter the time, do one of the following:
    • If you selected [12h Clock]:

      (Not available in Latin American countries)

      1. Enter the four digits of the time (in 12-hour format) using the dial pad.
      2. Press image, image, image or image to select [AM] or [PM] using the keyboard on the LCD, and then press OK.
      3. Press image, image, image or image to select [OK] using the keyboard on the LCD, and then press OK.
    • If you selected [24h Clock]:

      Enter the four digits of the time (in 24-hour format) using the dial pad, and then press OK.

  10. Press Detener/Salir (Stop/Exit).
Related Information
Was this page helpful?

Yes

No

find moreaccept