Search

Home > Introduction to Your Brother Machine > How to Navigate the Touchscreen LCD

How to Navigate the Touchscreen LCD

Related Models:HL‑L2395DW / MFC‑L2730DW / MFC‑L2750DW / MFC‑L2751DW / MFC‑L2770DW / MFC‑L2771DW

Press your finger on the LCD to operate it. To display and access all the options, press image image or image image on the LCD to scroll through them.

The following steps explain how to navigate through changing a machine setting. In this example, the LCD Backlight setting is changed from [Light] to [Med].

IMPORTANT
DO NOT press the LCD with a sharp object such as a pen or stylus. It may damage the machine.
NOTE
DO NOT touch the LCD immediately after plugging in the power cord or turning on the machine. Doing this may cause an error.
  1. Press image ([Settings]).
  2. Press [All Settings].
  3. Press image or image to display the [General Setup] option, and then press [General Setup].
    image
  4. Press image or image to display the [LCD Settings] option, and then press [LCD Settings].
    image
  5. Press [Backlight].
    image
  6. Press [Med].
    image
  7. Press image.
Was this page helpful?

Yes

No