Search

Home > Mobile/Web Connect > AirPrint > Before Using AirPrint > Disable and Enable AirPrint Using Web Based Management (Web Browser)

Disable and Enable AirPrint Using Web Based Management (Web Browser)

Confirm that your Brother machine is connected to the same network as your computer.

  1. Start your web browser.
  2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    http://192.168.1.2

  3. No password is required by default. Type a password if you have set one, and then click image.
  4. Click the Network tab.
  5. Click the Protocol menu in the left navigation bar.
  6. To disable AirPrint, clear the AirPrint check box. To enable AirPrint, select the AirPrint check box.
    image
    By default, AirPrint is enabled.
  7. Click Submit.
  8. Restart your machine to activate the configuration.
Was this page helpful?

Yes

No