Search

Home > Copy > Make N in 1 Copies Using the Page Layout Feature

Make N in 1 Copies Using the Page Layout Feature

The N in 1 copy feature saves paper by copying two or four pages of your document onto one page of the copy.
image

DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW

  1. Load your document.
  2. Do one of the following:
    • For MFC models

      Press image (COPY).

      Use the dial pad to enter the number of copies you want.

    • For DCP models

      Press image or image to enter the number of copies you want.

  3. Press Options or Copy/Scan Options.
  4. Press image or image to select [Page Layout], and then press OK.
  5. Press image or image to select [Off(1 in 1)], [2 in 1 (P)], [2 in 1 (L)], [4 in 1 (P)] or [4 in 1 (L)], and then press OK.
  6. Press Start.
    If you placed the document in the ADF, the machine scans the pages and starts printing.
    If you are using the scanner glass, go to the next step.
  7. Repeat the following steps for each page of the layout:
    • For MFC models
      1. After the machine scans the page, press image to scan the next page.
      2. Place the next page on the scanner glass, and then press OK to scan the page.
    • For DCP models

      After the machine scans the page, place the next page on the scanner glass, and then press image to select the [Yes] option.

  8. After scanning all the pages, press image to select the [No] option.

HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW

  1. Load your document.
  2. Press image ([Copy]).
  3. Enter the number of copies.
  4. Press [Options].
  5. Press image or image to display the [Page Layout] option, and then press [Page Layout].
  6. Press image or image to display the options, and then press the option you want.
    Option
    Description

    2in1(Portrait)

    image

    2in1(Landscape)

    image

    4in1(Portrait)

    image

    4in1(Landscape)

    image
  7. When finished, press [OK].
  8. Press [Start]. If you placed the document in the ADF, the machine scans the pages and starts printing.
    If you are using the scanner glass, go to the next step.
  9. After the machine scans the page, place the next page on the scanner glass, and then press [Yes] to scan the next page.
  10. When finished, press [No] to finish.
Was this page helpful?

Yes

No