Search

Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Both Sides of a Document Automatically Using ControlCenter4 Home Mode (Windows)

Scan Both Sides of a Document Automatically Using ControlCenter4 Home Mode (Windows)

Related Models:MFC‑L2750DW / MFC‑L2751DW / MFC‑L2770DW / MFC‑L2771DW

Select Home Mode as the mode setting for ControlCenter4.

  1. Load documents in the ADF.
    image
    To scan both sides of a document automatically, you must use the ADF, not the flatbed scanner glass.
  2. Click the image (ControlCenter4) icon in the task tray, and then click Open.
  3. Click the Scan tab.
    image
  4. Under Document Type, select Custom, and then click the Custom Settings button.
    The Custom Scan Settings dialog box appears.
  5. Select the 2-sided Scanning check box.
  6. Select the Long-edge binding or Short-edge binding option, depending on the Original layout.
  7. Configure other Custom Scan Settings, if needed.
  8. Click OK.
  9. Click image (Scan).
    The machine starts scanning, and the scanned image appears in the image viewer.
  10. Click the left or right arrow buttons to preview each scanned page.
  11. Do one of the following:
    • Clickimage (Save) to save scanned data.
    • Click image (Print) to print scanned data.
    • Click image (Open with an Application) to open scanned data in another application.
    • Click image (Send E-mail) to attach scanned data to an email.
    • Click image (OCR) to convert your scanned document to an editable text file. (available only for certain models)
Was this page helpful?

Yes

No