Search

Export the Self-signed Certificate

  1. Start your web browser.
  2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:

    http://192.168.1.2

    image
    • If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.

      • For example:

        http://SharedPrinter

      If you enable a NetBIOS name, you can also use the node name.

      • For example:

        http://brnxxxxxxxxxxxx

      The NetBIOS name can be found in the Network Configuration Report.

    • For Mac, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
  3. No password is required by default. Type a password if you have set one, and then click image.
  4. Click the Network tab.
  5. Click the Security tab.
  6. Click Certificate.
  7. Click Export shown with Certificate List.
  8. If you want to encrypt the file, type a password in the Enter password field.
    If the Enter password field is blank, your output file will not be encrypted.
  9. Type the password again in the Retype password field, and then click Submit.
  10. Click Save.
  11. Specify the location where you want to save the file.
The self-signed certificate is exported to your computer.

You can also import the self-signed certificate to your computer.

Was this page helpful?

Yes

No