Search

Home > Fax > Receive a Fax > Remote Fax Retrieval > Set a Remote Access Code

Set a Remote Access Code

Related Models:MFC‑L2710DW / MFC‑L2713DW / MFC‑L2715DW / MFC‑L2716DW / MFC‑L2730DW / MFC‑L2750DW / MFC‑L2751DW / MFC‑L2770DW / MFC‑L2771DW
Set a Remote Access Code to access and control your Brother machine even when you are away from it.
Before you can use the remote access and retrieval features, you must set up your own code. The factory default code is the inactive code (---*).

MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW

  1. Press Menu.
  2. Press image or image to display the [Fax] option, and then press OK.
  3. Press image or image to display the [Memory Receive] option, and then press OK.
  4. Press image or image to display the [Remote Access] option, and then press OK.
  5. Enter a three-digit code using the numbers 0 to 9, * or # using the dial pad, and then press OK.
    image
    • To make your code inactive, press Clear to delete the three-digit code in this step. Then press OK.
    • You cannot change the preset *.
    • DO NOT use the same code used for your Remote Activation Code (*51) (*91 for New Zealand) or Remote Deactivation Code (#51) (#91 for New Zealand) .

  6. Press Stop/Exit.

MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW

  1. Press image[Settings]>[All Settings]>[Fax]>[Remote Access].
  2. Enter a three-digit code using the numbers [0] to [9], [*] or [#] using the the LCD (The preset '*' cannot be changed), and then press [OK].
    image
    • DO NOT use the same code used for your Remote Activation Code (*51) (*91 for New Zealand) or Remote Deactivation Code (#51) (#91 for New Zealand).
    • To make your code inactive, press and hold image to restore the inactive setting (---*), and then press [OK].
  3. Press image.
Was this page helpful?

Yes

No