Search

Site Map

Home > Fax > Receive a Fax > Remote Fax Retrieval > Use Your Remote Access Code

Use Your Remote Access Code

Related Models:MFC‑J690DW / MFC‑J895DW
  1. When away from your Brother machine, dial your fax number from a touch-tone telephone or fax machine.
  2. When your machine answers, immediately enter your three-digit Remote Access Code, followed by *.
  3. Your Brother machine signals if it has received faxes:
    • One long beep - the machine received at least one fax
    • No beeps - the machine has not received a fax
  4. When the machine gives two short beeps, enter a command.
    • The machine will hang up if you wait longer than 30 seconds to enter a command.
    • The machine will beep three times if you enter an invalid command.
  5. When finished, press 9, and then press 0 to deactivate your machine.
  6. Hang up.
    image
    This feature may not be available in some countries or supported by your local telephone company.
Related Information
Was this page helpful?

Yes

No

find moreaccept