Search

Site Map

Home > Fax > Receive a Fax > Receive Mode Settings > Set the Number of Rings Before the Machine Answers (Ring Delay)

Set the Number of Rings Before the Machine Answers (Ring Delay)

When somebody calls your machine, you will hear the normal telephone ring sound. The number of rings is set in the Ring Delay option.
  • The Ring Delay setting sets the number of times the machine rings before it answers in [Fax Only] and [Fax/Tel] modes.
  • If you have external or extension telephones on the same line as the machine, keep the Ring Delay setting of [4].

MFC-J491DW/MFC-J497DW

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Setup Receive]. Press OK.
    3. Select [Ring Delay]. Press OK.
    4. Select the number of times you want the line to ring before the machine answers (0, 1, 2, 3, or 4). Press OK.
      image
      • If you select [0], the machine will answer immediately and the line will not ring at all (available only for some countries).
  3. Press Stop/Exit.

MFC-J690DW/MFC-J895DW

  1. Press image [Settings]>[All Settings]>[Fax]>[Setup Receive]>[Ring Delay].
  2. Press the number of times you want the line to ring before the machine answers (0, 1, 2, 3, or 4).
    image

    If you select [0], the machine will answer immediately and the line will not ring at all (available only for some countries).

  3. Press image.
Related Information
Was this page helpful?

Yes

No

find moreaccept