Search

Site Map

Transfer Faxes to Another Fax Machine

If you have not set up your Station ID, you cannot enter Fax Transfer mode.

MFC-J491DW/MFC-J497DW

  1. Press Stop/Exit to interrupt the error temporarily.
  2. Press Settings.
  3. Press image or image to select the following:
    1. Select [Service]. Press OK.
    2. Select [Data Transfer]. Press OK.
    3. Select [Fax Transfer]. Press OK.
  4. Do one of the following:
    • If the LCD displays [No Data], there are no faxes left in the machine's memory.

      Press image, and then press Stop/Exit.

    • Enter the fax number where faxes will be forwarded.
  5. Press Black Start.

MFC-J690DW/MFC-J895DW

  1. Press image to interrupt the error temporarily.
  2. Press image[Settings]>[All Settings]>[Service]>[Data Transfer]>[Fax Transfer].
  3. Do one of the following:
    • If the touchscreen displays [No Data], there are no faxes left in the machine’s memory.

      Press [Close], and then press image.

    • Enter the fax number where faxes will be forwarded.
  4. Press [Fax Start].
Related Information
Was this page helpful?

Yes

No

find moreaccept