Search

Home > Introduction to Your Brother Machine > LED Patterns and Indications (HL-B2000D)

LED Patterns and Indications (HL-B2000D)

Related Models:HL‑B2000D
The LEDs on your machine's control panel light up, dim, or blink to indicate machine status.

LED indications are defined in the table below.

image

LED is off.

image or image

LED is on.

image

LED is dimmed.

image or image

LED is blinking.

This table defines what LEDs indicate when they light up, dim, or blink.

LED indication Status Meaning

image

Sleep

In Sleep mode (Power Save mode), the machine acts as if it is turned off, but it can still receive data. Receiving a print job will wake the machine and it will start printing.

Deep Sleep

In Deep Sleep mode (lower power consumption than Sleep mode), the machine acts as if it is turned off, but it can still receive data. If the machine does not receive data for the length of time you specify, it enters Deep Sleep mode. Receiving a print job will wake the machine and it will start printing.

image

Ready

The machine is ready to print.

image

Please Wait

The machine is warming up.

Printing

The machine is printing.

Cooling Down

The machine is cooling down.

Wait for 10 minutes or until the inside of the machine has cooled down.

image

Cancel Printing

The machine is canceling the job.

Was this page helpful?

Yes

No