Specifications

Item

Specification

Dimensions of machine

Approx. 552 mm (W) × 285 mm (H) × 310 mm (D)
(approx. 21-23/32 inches (W) × 11-7/32 inches (H) × 12-21/32 inches (D))

Weight of machine

Approx. 12.4 kg (approx. 28 lb)

Dimensions of machine with embroidery unit attached

Approx. 815 mm (W) × 524 mm (H) × 310 mm (D)
(approx. 32-3/32 inches (W) × 20-5/8 inches (H) × 12-21/32 inches (D))

Weight of machine with embroidery unit attached

Approx. 16.2 kg (approx. 36 lb)

Maximum embroidery speed

850 stitches per minute

Interfaces

Wireless LAN*1

Memory

Embroidery patterns

Up to 2 MB or 20 embroidery patterns
(Up to 500,000 stitches per pattern)

Data Types

Embroidery patterns*2

.pes .phc .dst .pen

Maximum embroidering area

360 mm (H) x 200 mm (W) (approx. 14 inches (H) x 8 inches (W))

Types of USB Devices

  • USB Flash drive (Type A)
    Supported formats: FAT32
    Recommended size: 32 GB or less
  • Some USB media may not be usable with this machine.

Condition of the [Power Saving Mode]

Available time

OFF, 20 minutes, 1 - 4 hour(s)

“Start/Stop” button

Green slow flashing

Suspended function

All functions

After recovering

Start the operation again from the beginning.
When the machine enters the power saving mode during embroidering, you have the option to continue or delete the pattern.

  1. The wireless network connection complies with IEEE 802.11b/g/n standards and uses the 2.4 GHz frequency.
    A wireless network cannot be set up with WPA™/WPA2™/WPA3™ Enterprise.
    Use Design Database Transfer or PE-DESIGN version 11 or later to transfer data from your computer to the machine. For the operating systems compatible with the software, visit our website https://s.brother/cnhkc/.
  2. Using data other than that saved using our data design systems or this machine may cause this machine to malfunction.
    When the machine is used to save a file with any extension, it is saved as a .phc data file.
    Since Tajima (.dst) data does not contain specific thread color information, it is displayed with our default thread color sequence.
    Check the preview and change the thread colors as desired.

Please be aware that some specifications may change without notice.

We recommend using the 26 letters of the alphabet (uppercase and lowercase), the numbers 0 through 9, “-”, and “_” for the name of the file/folder.

IMPORTANT

When using embroidery data other than our original patterns, the thread or needle may break when embroidering with a stitch density that is too fine or when embroidering three or more overlapping stitches. In that case, use one of our original data design systems to edit the embroidery data.

Print