Search

Site Map

Home > Paper Handling > Load Paper > Paper Settings > Change the Check Paper Size Setting

Change the Check Paper Size Setting

If this setting is set to [On] and you pull the paper tray out of the machine, the LCD displays a message asking if you want to change the Paper Size and Paper Type settings.

The default setting is [On].

DCP-J572DW/MFC-J491DW

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [General Setup]. Press OK.
    2. Select [Tray Setting]. Press OK.
    3. Select [Check Paper]. Press OK.
    4. Select [On] or [Off]. Press OK.
  3. Press Stop/Exit.

DCP-J772DW/MFC-J690DW/MFC-J890DW

  1. Press image[Settings]>[All Settings]>[General Setup].
  2. Press image or image to display the [Check Paper] option, and then press it.
  3. Press [On] or [Off].
  4. Press image.
Related Information
Was this page helpful?

Yes

No

find moreaccept