Search

Site Map

Set Your Station ID

Related Models:MFC‑J491DW / MFC‑J690DW / MFC‑J890DW
Set the machine's Station ID if you want the date and time to appear on each fax you send.

MFC-J491DW

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [Initial Setup]. Press OK.
    2. Select [Station ID]. Press OK.
  3. Press image or image to select [Fax], and then press OK.
  4. Enter your fax number (up to 20 digits) using the dial pad, and then press OK.
  5. Press image or image to select [Name], and then press OK.
  6. Enter your name (up to 20 characters) using the dial pad, and then press OK.
    image
    For more information about how to enter text, see the Appendix.
  7. Press Stop/Exit.

MFC-J690DW/MFC-J890DW

  1. Press image[Settings]>[All Settings]>[Initial Setup]>[Station ID].
  2. Press [Fax].
  3. Enter your fax number (up to 20 digits) on the touchscreen, and then press [OK].
  4. Press [Name].
  5. Enter your name (up to 20 characters) using the touchscreen, and then press [OK].
    image
    • Press image to cycle between letters, numbers and special symbols. (The available characters may differ depending on your country.)
    • If you entered an incorrect character and want to change it, press image or image to move the cursor to it. Press image and then enter the correct character.
    • To enter a space, press [Space].
  6. Press image.
Related Information
Was this page helpful?

Yes

No

find moreaccept