Search

Home > Scan > Scan Using the Scan Button on Your Brother Machine > Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) > Scan Using Web Services from the Brother Machine (Windows 7, Windows 8 and Windows 10)

Scan Using Web Services from the Brother Machine (Windows 7, Windows 8 and Windows 10)

If you have installed the driver for scanning via Web Services, you can access the Web Services scanning menu on your Brother machine's LCD.
  • Certain characters in the messages displayed on the LCD may be replaced with spaces if the language settings of your OS and your Brother machine are different.

  • If the LCD displays an insufficient memory error message, choose a smaller size in the Paper size setting or a lower resolution in the Resolution (DPI) setting.

DCP-J572DW/MFC-J491DW

  1. Load your document.
  2. Press image (SCAN).
  3. Press image or image to select the following:
    1. Select [WS Scan]. Press OK.
    2. Select the type of scan you want. Press OK.
    3. Select the computer where you want to send data. Press OK.
  4. Press Mono Start or Colour Start.
    The machine starts scanning.

DCP-J772DW/MFC-J690DW/MFC-J890DW

  1. Load your document.
  2. Press [Scan]>[WS Scan].
  3. Press image or image to select the type of scan you want, and then press it.
  4. Press image or image to display the computer where you want to send data, and then press the computer name.
  5. Press [Start].
    The machine starts scanning.
Was this page helpful?

Yes

No