Search

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup (WPS)

Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup (WPS)

DCP-J572DW/MFC-J491DW

If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi Direct network:
image

When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi Direct connection request received.] will appear on the LCD. Press image to connect.

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [Network]. Press OK.
    2. Select [Wi-Fi Direct]. Press OK.
    3. Select [Group Owner]. Press OK.
    4. Select [On]. Press OK.
    5. Select [Push Button]. Press OK.
  3. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device.] appears. Press image on your Brother machine. This will start the Wi-Fi Direct setup.
  4. If your mobile device connects successfully, the machine displays [Connected]. You have completed the Wi-Fi Direct network setup.

DCP-J772DW/MFC-J690DW/MFC-J890DW

If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi Direct network:
image

When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi Direct connection request received. Press [OK] to connect.] will appear on the LCD. Press [OK] to connect.

  1. Press image[Settings]>[All Settings]>[Network]>[Wi-Fi Direct]>[Group Owner]>[On].
  2. Press [Push Button].
  3. Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for instructions). When [Activate Wi-Fi Direct on other device. Then Press [OK].] appears on the machine's LCD, press [OK] on your machine.
    This will start the Wi-Fi Direct setup.

If your mobile device connects successfully, the machine displays [Connected]. You have completed the Wi-Fi Direct network setup.

Was this page helpful?

Yes

No