Search

Site Map

Turn TX Lock On/Off

Related Models:MFC‑T810W / MFC‑T910DW

MFC-T810W

  1. Press Menu.
  2. Press image or image to select the following:
    1. Select [General Setup]. Press OK.
    2. Select [Security]. Press OK.
    3. Select [TX Lock]. Press OK.
    4. Select [Set TX Lock]. Press OK.
  3. Enter the registered four-digit number for the password. Press OK.
    The machine goes offline and the LCD displays [TX Lock Mode].
    image

    Turning off TX Lock:

    1. Press Menu.
    2. Enter the current four-digit password, and then press OK.

      If you enter the wrong password, the LCD displays [Wrong Password] and stays offline. The machine will stay in TX Lock Mode until the correct password is entered.

MFC-T910DW

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Miscellaneous]. Press OK.
    3. Select [TX Lock]. Press OK.
    4. Select [Set TX Lock]. Press OK.
  3. Enter the registered four-digit password. Press OK.
    The machine goes offline and the LCD displays [TX Lock Mode].
    image

    Turning off TX Lock:

    1. Press Settings.
    2. Enter the current four-digit password, and then press OK.

      If you enter the wrong password, the LCD displays [Wrong Password] and stays offline. The machine will stay in TX Lock Mode until the correct password is entered.

Related Information
Was this page helpful?

Yes

No

find moreaccept