Search

Site Map

Home > Paper Handling > Load Paper > Paper Settings > Change the Paper Size and Paper Type

Change the Paper Size and Paper Type

Related Models:DCP‑T510W / DCP‑T710W / MFC‑T810W / MFC‑T910DW
Set the Paper Size and Paper Type settings for the paper tray.
  • To get the best print quality, set the machine for the type of paper you are using.
  • When you change the size of the paper you load in the tray, you must change the Paper Size setting on the LCD at the same time.

DCP-T510W/DCP-T710W/MFC-T810W

  1. Press Menu.
  2. Press image or image to select the following:
    1. Select [General Setup]. Press OK.
    2. Select [Tray Setting]. Press OK.
    3. Select [Paper Type]. Press OK.
    4. Select [Plain Paper], [Inkjet Paper], [Brother BP71] or [Other Glossy]. Press OK.
    5. Select [Paper Size]. Press OK.
    6. Select the paper size option you want, and then press OK.
  3. Press Stop/Exit.
    image
    The machine ejects paper with the printed surface face up onto the paper tray at the front of the machine. When you use glossy paper, remove each sheet at once to prevent smudging or paper jams.

MFC-T910DW

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [General Setup]. Press OK.
    2. Select [Tray Setting]. Press OK.
    3. Select the tray option you want. Press OK.
    4. Select [Paper Type]. Press OK.
    5. Select [Plain Paper], [Inkjet Paper], [Brother BP71] or [Other Glossy]. Press OK.
    6. Select [Paper Size]. Press OK.
    7. Select the paper size option you want, and then press OK.
  3. Press Stop/Exit.
    image
    The machine ejects paper with the printed surface face up onto the paper tray at the front of the machine. When you use glossy paper, remove each sheet at once to prevent smudging or paper jams.
Related Information
Was this page helpful?

Yes

No

find moreaccept