Search

Site Map

Home > Fax > Send a Fax > Send a Fax at the End of a Conversation > Set the Fax Logic (Sending and Receiving Sequence)

Set the Fax Logic (Sending and Receiving Sequence)

Related Models:MFC‑T810W / MFC‑T910DW
You can change the process of manual fax send or receive.

If you often send or receive a fax manually to/from the other party at the end of a conversation, set the [Fax Mode] to [Easy Mode].

If you set to [Easy Mode]: You can send or receive a fax manually just simply press [Fax Start]. If you are a caller, press [Fax Start] to send a fax. If you are a receiver, press [Fax Start] to receive a fax.

If you set to [Advanced Mode]: No matter you are a caller or receiver, you can select you will send or receive a fax manually. When you press [Fax Start], the machine will ask you: [Send/Receive?]. If you want to send a fax, press [Send]. If you want to receive a fax, press [Receive].

image

Even if you set either [Easy Mode] or [Advanced Mode] and if there is a document in the ADF, the document in the ADF will be sent by pressing [Fax Start].

MFC-T810W

  1. Press Menu.
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Miscellaneous]. Press OK.
    3. Select [Fax Mode]. Press OK.
  3. Press image or image to select [Easy Mode] or [Advanced Mode]. Press OK.
  4. Press Stop/Exit.

MFC-T910DW

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Miscellaneous]. Press OK.
    3. Select [Fax Mode]. Press OK.
  3. Press image or image to select [Easy Mode] or [Advanced Mode]. Press OK.
  4. Press Stop/Exit.
Related Information
Was this page helpful?

Yes

No

find moreaccept