Search

Site Map

Home > Fax > Receive a Fax > Receive Mode Settings > Choose the Correct Receive Mode

Choose the Correct Receive Mode

Related Models:MFC‑T810W / MFC‑T910DW

MFC-T810W

The factory setting of Receive Mode is “Fax Auto”. Your machine will automatically receive any faxes that are sent to it. There are four Receive Modes of this machine as below.

Operation Display Factory Setting Ring Delay
Fax Auto

Ring Delay: four times

Fax detection: On

Fax/Tel

Ring Delay: four times

External TAD
Manual

  1. Press Menu.
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Setup Receive]. Press OK.
    3. Select [Receive Mode]. Press OK.
  3. Press image or image to select the [Fax Auto], [Fax/Tel], [External TAD], or [Manual] option, and then press OK.
  4. Press Stop/Exit.

MFC-T910DW

The factory setting of Receive Mode is “Fax Auto”. Your machine will automatically receive any faxes that are sent to it. There are four Receive Modes of this machine as below.

Operation Display Factory Setting Ring Delay
Fax Auto

Ring Delay: four times

Fax detection: On

Fax/Tel

Ring Delay: four times

External TAD
Fax Manual

  1. Press Settings.
  2. Press image or image to select the following:
    1. Select [Fax]. Press OK.
    2. Select [Setup Receive]. Press OK.
    3. Select [Receive Mode]. Press OK.
  3. Press image or image to select the [Fax Auto], [Fax/Tel], [External TAD], or [Fax Manual] option, and then press OK.
  4. Press Stop/Exit.
Related Information
Was this page helpful?

Yes

No

find moreaccept