Search

Home > Security > Network Security Features > Send an Email Securely > Configure Email Sending Using Web Based Management

Configure Email Sending Using Web Based Management

Related Models:MFC‑J995DW

We recommend using Web Based Management to configure secured email sending with user authentication.

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    https://192.168.1.2

  3. If the machine prompts you for a password, type it, and then click image.
  4. Click the Network tab.
  5. Click the Protocol menu in the left navigation bar.
  6. In the SMTP field, click Advanced Setting and make sure the status of SMTP is Enabled.
  7. Configure the SMTP settings.
    • Confirm that the email settings are correct after configuration by sending a test email.
    • If you do not know the SMTP server settings, contact your network administrator or Internet Service Provider (ISP).
  8. When finished, click Submit.
    The Test Send E-mail Configuration dialog box appears.
  9. Follow the instructions in the dialog box to test the current settings.
Was this page helpful?

Yes

No