Search

Home > Introduction to Your Brother Machine > USB / Ethernet Port Locations on Your Brother Machine

USB / Ethernet Port Locations on Your Brother Machine

The USB and Ethernet ports are located inside the machine (Ethernet ports are available only for certain models).
  • When connecting the USB or Ethernet cable, follow the instructions in the installation process.
  • To install the Full Driver & Software Package necessary for operating your machine, insert the Brother installation disc into your computer, or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
  1. Place both hands under the plastic tabs on both sides of the machine to lift the scanner cover (1) into the open position.
    image
  2. Locate the correct port (based on the cable you are using) inside the machine as shown.
    image
    image
    Carefully guide the cable through the cable channel and out the back of the machine.
  3. Gently close the scanner cover using both hands.
    image
Was this page helpful?

Yes

No