Search

Site Map

Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to SSH FTP (SFTP) > Create a Client Key Pair Using Web Based Management

Create a Client Key Pair Using Web Based Management

Related Models:MFC‑J995DW
  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:

    https://192.168.1.2

    image

    • If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.

      • For example:

        https://SharedPrinter

      If you enable a NetBIOS name, you can also use the node name.

      • For example:

        https://brnxxxxxxxxxxxx

      The NetBIOS name can be found in the Network Configuration Report.

    • For Mac, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
  3. If the machine prompts you for a password, type it, and then click image.
  4. Click the Network tab.
  5. Click the Security tab.
  6. Click Client Key Pair in the left navigation bar.
  7. Click Create New Client Key Pair.
  8. In the Client Key Pair Name field, type the name (up to 20 characters) you want.
  9. Click the Public Key Algorithm drop-down list, and then select the algorithm you want.
  10. Click Submit.

    The client key pair is created and saved in your machine's memory. The client key pair name and public key algorithm will be displayed in the Client Key Pair List.

Related Information
Was this page helpful?

Yes

No

find moreaccept