Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN Method
Configure Your Wi-Fi Direct Network Using the PIN Method
DCP-T510W/DCP-T710W
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi Direct connection request received. Press [OK] to connect.] will appear on the LCD. Press OK to connect.
- Press Menu.
- Press or to select the following:
- Select [Network]. Press OK.
- Select [Wi-Fi Direct]. Press OK.
- Select [PIN Code]. Press OK.
- When [Wi-Fi Direct On?] appears, press to select [On]. To cancel, press .
- Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears. Press OK on your Brother machine. This will start the Wi-Fi Direct setup.
- Do one of the following:
- When your Brother machine is the G/O (Group Owner), it will wait for a connection request from your mobile device. When [PIN Code] appears, enter the PIN displayed on your mobile device in the machine. Press OK. Follow the instructions, and then go to the next step. If the PIN is displayed on your Brother machine, enter the PIN in your mobile device.
- When your Brother machine is not the G/O (Group Owner), it will display available device names with which to configure a Wi-Fi Direct network. Select the mobile device to which you want to connect and press OK. Search for available devices again by selecting [Rescan].
When [Select PIN Method] appears, do one of the following:
- Press to display the PIN on your machine and enter the PIN in your mobile device. Follow the instructions, and then go to the next step.
- Press to enter a PIN shown on your mobile device in the machine, and then press OK. Follow the instructions, and then go to the next step.
- If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup.
MFC-T910DW
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi Direct connection request received.] will appear on the LCD. Press to connect.
- Press Settings.
- Press or to select the following:
- Select [Network]. Press OK.
- Select [Wi-Fi Direct]. Press OK.
- Select [PIN Code]. Press OK.
- Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device.] appears. Press on your Brother machine. This will start the Wi-Fi Direct setup.
- Do one of the following:
- When your Brother machine is the G/O (Group Owner), it will wait for a connection request from your mobile device. If the LCD prompts you to enter a PIN, enter the PIN displayed on your mobile device in the machine. Press OK. Follow the instructions, and then go to the next step. If the PIN is displayed on your Brother machine, enter the PIN in your mobile device.
- When your Brother machine is not the G/O (Group Owner), it will display available device names with which to configure a Wi-Fi Direct network. Select the mobile device to which you want to connect and press OK. Search for available devices again by selecting [Rescan].
When [Select PIN Method] appears, do one of the following:
- Press to display the PIN on your machine and enter the PIN in your mobile device. Follow the instructions, and then go to the next step.
- Press to enter a PIN shown on your mobile device in the machine, and then press OK. Follow the instructions, and then go to the next step.
- If your mobile device connects successfully, the machine displays [Connected]. You have completed the Wi-Fi Direct network setup.