Search

Home > Troubleshooting > Paper Jams > Paper is Jammed in the MP tray

Paper is Jammed in the MP tray

If the machine's control panel or the Status Monitor indicates that there is a jam in the machine's MP tray, follow these steps:

  1. Remove the paper from the MP tray.
  2. Remove any jammed paper from in and around the MP tray.
    image
  3. Fan the paper stack, and then put it back in the MP tray.
  4. Reload paper in the MP tray and make sure the paper stays under the maximum paper height guides (1) on both sides of the tray.
    image
  5. Follow the instructions on the machine's LCD.
Was this page helpful?

Yes

No