Search

Home > Routine Maintenance > Pack and Ship Your Brother Machine

Pack and Ship Your Brother Machine

WARNING
  • When you move the machine, carry the machine as shown in the illustration.

    image

image
  • If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid any damage during transit. The machine should be adequately insured with the carrier.
  1. Press and hold image to turn the machine off. Leave the machine off for at least 10 minutes to cool down.
  2. Disconnect all the cables, and then unplug the power cord from the electrical socket.
    image

    Some models are equipped with a non-detachable AC power cord. If your cord is not detachable, fold it loosely and rest it on top of the machine so it packs easily.

  3. Put the machine into the bag it originally came in.
  4. Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the original packing material as shown. The illustrations may differ from the actual packing materials. The materials vary depending on your model.
    image
  5. Close the carton and tape it shut.
Was this page helpful?

Yes

No