Search

Site Map

Home > Routine Maintenance > Clean Your Brother Machine > Clean the Print Head Using Web Based Management

Clean the Print Head Using Web Based Management

To maintain good print quality, the machine automatically cleans the print head when needed. If there is a print quality problem, start the cleaning process manually.
  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click General>Print Head Cleaning.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. Select the Normal, Strong, or Strongest option for the cleaning strength you want. The Special option uses the most power in cleaning the print head, but also consumes the most ink.
  6. Click Start.
    image
    • The Special option requires a large amount of ink to clean the print head.
    • Use the Special option only if you previously used the Strongest option and the print quality did not improve.
  7. Click Yes.
    The machine starts cleaning.
image
(Windows) You can also clean the print head using the printer driver.
Related Information
Was this page helpful?

Yes

No

find moreaccept