FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to Embroider on Cap. [Video instructions]
- 2How to set up the cap frame. [Video instructions]
- 3Color thread table
- 4Why does the needle keep breaking?
- 5Colors of Tajima (.dst) embroidery data
- 6How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 7How to Embroider on Bag. [Video instructions]
- 8How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 9Maintenance (Cleaning the thread paths of the upper threads)
- 10The thread tension is incorrect.
- 11There is puckering in the fabric.
- 12"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
- 13"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 14"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 15Creating Beautiful Embroidery ( Hooping techniques )
- 16How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 17What is Wiper ?
- 18Maintenance (Oiling the machine)
- 19How do I install the bobbin wound with thread?
- 20Although the thread is not broken, a broken thread error occurs and the machine stops.
- 21The bobbin thread breaks.
- 22"OK to delete the selected pattern?" message appears on the LCD.What does it mean?
- 23"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 24"Trimming sensor error." message appears on the LCD. What does it mean?
- 25"This pattern cannot be used." message appears on the LCD. What does it mean?
- 26"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 27"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 28"Press the unlock key to unlock the machine." message appears on the LCD. What does it mean?
- 29"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
- 30"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 31"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 32Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 33How do I embroider on small pieces of fabric ?
- 34How do I change the needle?
- 35How do I adjust the tension of the upper thread ?
- 36How do I adjust the tension of the bobbin thread ?
- 37How do I wind the bobbin?
- 38Maintenance (Cleaning around the needle plate)
- 39Maintenance (Clean the hook)
- 40"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean and how do I clear it?
- 41"Picker error" message appears on the LCD. What does it mean?
- 42Why does the upper thread keep breaking?
- 43How do I thread the machine? (Threading the upper thread)
- 44Fabric/stabilizer compatibility chart
- 45Stabilizers (Backing)
- 46When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 47The needle threader cannot be used.
- 48Embroidery pattern does not sew out correctly.
- 49Stitches are skipped.
- 50LED pointer does not indicate the position correctly.