FAQs & Troubleshooting
![]() |
Popular |
94 Results
1.
Why does the needle keep breaking?
2.
How to set up the cap frame. [Video instructions]
3.
How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
4.
Loops appear on the surface of the fabric when embroidering.
5.
How to set up the cap frame driver. [Video instructions]
6.
The bobbin thread breaks.
7.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
8.
The thread tension is incorrect.
9.
How do I use the embroidery sheet ?
10.
How do I wind the bobbin?
11.
How to Embroider on Cap. [Video instructions]
12.
How to Embroider on Shoes. [Video instructions]
13.
"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean and how do I clear it?
14.
Creating Beautiful Embroidery (Threads)
15.
There is puckering in the fabric.
16.
"This embroidery card cannot be used. Unusable cards include, cards licensed for sale in other countries, no embroidery pattern, etc." message appears on the LCD. What does it mean?
17.
"Check upper and bobbin thread." message appears on the LCD. What does it mean and how do I clear it?
18.
How do I resume embroidering after turning off the machine ?
19.
"Preventive maintenance is recommended" appears on the LCD.
20.
Bobbin thread does not wind neatly on the bobbin.
21.
"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
22.
"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
23.
How do I attach or remove the embroidery frame ?
24.
Maintenance (Cleaning the thread paths of the upper threads)
25.
Maintenance (Cleaning around the needle plate)
26.
"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean and how do I clear it?
27.
"Needle threader is in threading position." message appears on the LCD. What does it mean and how do I clear it?
28.
Embroidery pattern does not sew out correctly.
29.
"Trimming sensor error." message appears on the LCD. What does it mean?
30.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?