Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
If your mobile device supports WPS (PBC: Push Button Configuration), follow these steps to configure a Wi-Fi Direct network:
- Press or to select the [Network] option, and then press OK.
- Press or to select the [Wi-Fi Direct] option, and then press OK.
- Press or to select the [Group Owner] option, and then press OK.
- Press or to select the [On] option, and then press OK.
- Press or to select the [Push Button] option, and then press OK.
- When [Wi-Fi Direct On?] appears, press to accept. To cancel, press .
- Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears on the machine's LCD. Press OK on your machine.This will start the Wi-Fi Direct setup. To cancel, press Back.
- If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.
Was this page helpful?