Error message printout

The printer can also report problems by printing an error message. Use the table below to identify and clear the error message.

Error message

Action

MEMORY FULL

•	Press Go to print the remaining data in the printer memory. Cancel the print job if you want to delete the remaining data in the printer memory. See Control panel button.
•	Reduce the complexity of your document or cut the print resolution.
•	Add more memory. See Installing extra memory

PRINT OVERRUN

•

Press Go to print the remaining data in the printer memory. Cancel the print job if you want to delete the remaining data in the printer memory. See Control panel button.

•

If this does not clear the error, reduce the complexity of your document or cut the print resolution.

•

Add more memory. See Installing extra memory.

•

Set page protection to AUTO by using the supplied Windows^® driver or Remote Printer Console program.

•

Change the following settings in the supplied Windows^® driver and try again. The best combination of these settings will vary depending on your document:

•	Graphics mode
•	TrueType mode
•	Use Printer TrueType^® Fonts

RESOLUTION REDUCED TO ENABLE PRINTING

(The printer has printed the document at a reduced resolution)

•	Reduce the complexity of your document before you print to prevent automatic reduction in the resolution.

Page Top