Reprinting documents

Reprinting the last job

You can reprint the data from the last print job without sending it from the computer again.

Note

•	Reprint function is not available when Secure Function Lock 2.0 (HL-3070CW only) is On. For more information about Secure Function Lock 2.0, see the Chapter 14 of the Network User’s Guide on the CD-ROM we have supplied.
•	If you want to cancel reprinting, press Cancel.
•	If the printer does not have enough memory to spool the print job data, it will not print the document.
•	Pressing + or - makes the number of reprint copies decrease or increase. You can choose between 1 and 999 Copies.
•	If you wait 30 seconds to continue the control panel operation, the LCD leaves the Reprint setting automatically.
•	For more information about the settings in the printer driver, see Advanced tab.
•	After turning the power switch off, the last job data will be deleted.

Page Top

How to reprint the last job

Note

If you print with the Windows^® printer driver we have supplied with the printer, the settings for Use Reprint in the printer driver will take priority over the settings made on the control panel. (For more information, see Use Reprint.)

Make sure that the Reprint setting is On by using the buttons on the control panel to enter the General Setup menu.

Press Go for about 4 seconds and release it. Make sure that the LCD shows the following message.

Reprint : Print

Press + or - to choose Print. Press OK.

Reprint : Print

Press + to enter the number of copies you want.

Copies =3

Press OK or Go.

Printing

Reprint : Print

Page Top

Deleting the last job

Choose Delete in step 3 on How to reprint the last job.

Page Top

Canceling the reprint job

If you want to cancel the current reprint job, press Cancel. Cancel also allows you to cancel a paused reprint job.

Page Top