The message on the LCD shows the current printer status during normal operation.
Ready ![Graphic](images/m_wireless_strong.gif) ![](../img/spacer30.gif) |
The
![Graphic](images/m_wireless_strong.gif)
mark indicates the wireless signal strength with four levels. (
![Graphic](images/m_wireless_no.gif)
means no signal,
![Graphic](images/m_wireless_weak.gif)
means weak,
![Graphic](images/m_wireless_middle.gif)
means middle, and
![Graphic](images/m_wireless_strong.gif)
means strong.) (HL-3070CW only)
When an error has occurred, the type of error is displayed on the LCD message at first as shown below.
Cover is open ![](../img/spacer30.gif) |
Next, the second message which shows information for clearing the error is displayed on the LCD message as shown below.
Close the Top Co ![](../img/spacer30.gif) |
Printer status messages
The following table shows the printer status messages during normal operation:
Printer Status Message | Meaning |
Cooling Down | The printer is cooling down. |
Cancel Printing | Canceling the job. |
Ignore Data | Printer is ignoring data processed using the PS driver. |
Pause | The printer has suspended its operations. Press Go to start the printer again. |
Please Wait | The printer is warming up. The printer is carrying out the calibration process. |
Printing | Printing. |
Ready | Ready to print. |
Sleep | In Sleep mode. |