Menu Table

The menu table will help you understand the menu selections and options that are found in the machine's programs. The factory settings are shown in Bold with an asterisk.

Choose & OK

to accept

to exit

Main Menu	Submenu	Menu Selections	Options	Descriptions	Page
1.General Setup	1.Mode Timer	—	0 Sec 30 Secs* 1 Min 2 Mins 5 Mins Off	Sets the time to return to Fax mode.	Mode Timer
	2.Paper Type	—	Plain Paper* Inkjet Paper Brother Photo Other Photo Transparency	Sets the type of paper in the paper tray.	Paper Type
	3.Paper Size	—	Letter Legal A4* A5 10x15cm	Sets the size of the paper in the paper tray.	Paper Size
1.General Setup (Continued)	4.Volume	1.Ring	Off Low Med* High	Adjusts the ring volume.	Ring Volume
		2.Beeper	Off Low* Med High	Adjusts the volume level of the beeper.	Beeper Volume
		3.Speaker	Off Low Med* High	Adjusts the speaker volume.	Speaker Volume
	5.Auto Daylight	—	On* Off	Changes for Daylight Savings Time automatically.	Automatic Daylight Savings Time
	6.P.Save Setting	—	Fax Receive:On* Fax Receive:Off	Customizes the Power Save key not to receive faxes in power save mode.	Power Save setting
	7.LCD Contrast	—	Light Dark*	Adjusts the contrast of the LCD.	LCD Contrast
2.Fax	1.Setup Receive (In Fax mode only)	1.Ring Delay	(Example for the UK) 00 01 02* 03 04 05 06 07 08	Sets the number of rings before the machine answers in Fax Only or Fax/Tel mode.	Ring Delay
		2.F/T Ring Time	20 Sec 30 Sec* 40 Sec 70 Sec	Sets the pseudo/double-ring time in Fax/Tel mode.	F/T Ring Time(Fax/Tel mode only)
		3.Fax Detect	On* Semi Off	Receives fax messages without pressing Start.	Fax Detect
2.Fax (Continued)	1.Setup Receive (Continued) (In Fax mode only)	4.Remote Codes	On* (51, #51) Off	Allows you to answer all calls at an extension or external phone and use codes to turn the machine on or off. You can personalize these codes.	Using remote codes
		5.Auto Reduction	On* Off	Cuts the size of incoming faxes.	Printing a reduced incoming fax
		6.Memory Receive	On* Off	Automatically stores any incoming faxes in its memory if it runs out of paper.	Receiving faxes into memory
		7.Polling RX	Standard Secure Timer	Sets up your machine to poll another fax machine.	Setup for polling receive
	2.Setup Send (In Fax mode only)	1.Contrast	Auto* Light Dark	Changes the lightness or darkness of faxes you send.	Contrast
		2.Fax Resolution	Standard* Fine S.Fine Photo	Sets the default resolution for outgoing faxes.	Changing Fax Resolution
		3.Delayed Fax	—	Set the time of day in 24-hour format that the delayed faxes will be sent.	Delayed Faxing (Monochrome only)
		4.Batch TX	On Off*	Combines delayed faxes to the same fax number at the same time of day into one transmission.	Delayed Batch Transmission (Monochrome only)
		5.Real Time TX	Next Fax Only Off* On	Sends a fax without using the memory.	Real time transmission
		6.Polled TX	Standard Secure	Sets up the document on your machine to be retrieved by another fax machine.	Polled transmit (Monochrome only)
		7.Overseas Mode	On Off*	If you are having problems sending faxes overseas, set this to on.	Overseas Mode
2.Fax (Continued)	3.Set Quick-Dial	1.One-Touch Dial	—	Stores One-Touch Dial numbers, so you can dial by pressing only a few keys (and Start).	One-Touch Dialling
		2.Speed-Dial	—	Stores Speed-Dial numbers, so you can dial by pressing only a few keys (and Start).	Storing Speed-Dial numbers
		3.Setup Groups	—	Sets up a Group number for Broadcasting.	Setting up Groups for broadcasting
	4.Report Setting	1.XMIT Report	On On+Image Off* Off+Image	Sets initial setup for Transmission Verification Report and Fax Journal.	Reports
		2.Journal Period	Off Every 50 Faxes* Every 6 Hours Every 12 Hours Every 24 Hours Every 2 Days Every 7 Days		Fax Journal (activity report)
	5.Remote Fax Opt	1.Forward/Store	Off* Fax Forward Fax Storage	Sets the machine to forward fax messages or to store incoming faxes in the memory so you can retrieve them while you are away from your machine.	Fax Forwarding
		2.Remote Access	---	You must set your own code for Remote Retrieval.	Setting a Remote Access Code
		3.Print Document	—	Prints incoming faxes stored in the memory.	Printing a fax from the memory
	6.Remaining Jobs	—	—	Checks which jobs are in the memory and lets you cancel chosen jobs.	Checking and cancelling waiting jobs
	0.Miscellaneous	1.TX Lock	—	Prohibits most operations other than receiving faxes.	TX Lock
		2.Compatibility	High* Normal Basic	Adjusts the equalization for transmission problems.	Phone line interference
		3.BT Call Sign (U.K. only)	Off* On	Uses with BT Call Sign.	BT Call Sign (For U.K. only)
		4.Caller ID (U.K. and Ireland only)	Display ID* Print Report	View or print a list of the last 30 Caller IDs stored in the memory.	Caller ID (For U.K. and Ireland only)
3.Copy	1.Quality	—	Best Fast Normal*	Chooses the Copy resolution for your type of document.	Changing copy speed and quality
	2.Brightness	—	-+ -+ -+* -+ -+	Adjusts the brightness for copies.	Adjusting Brightness, Contrast and Colour
	3.Contrast	—	-+ -+ -+* -+ -+	Adjusts the contrast for copies.	Contrast
	4.Color Adjust	1.Red	R:- + R:- + R:- +* R:- + R:- +	Adjusts the amount of Red in copies.	Colour saturation
		2.Green	G:- + G:- + G:- +* G:- + G:- +	Adjusts the amount of Green in copies.
		3.Blue	B:- + B:- + B:- +* B:- + B:- +	Adjusts the amount of Blue in copies.
4.Print Reports	1.XMIT Verify	—	—	Prints a Transmission Verification Report for your last transmission.	Transmission Verification Report
	2.Help List	—	—	Prints the Help List so you can see at-a-glance how to quickly program your machine.	Reports
	3.Quick-Dial	—	—	Lists name and numbers stored in the One-Touch and Speed-Dial memory, in numerical order.	Reports
4.Print Reports (Continued)	4.Fax Journal	—	—	Lists information about the last incoming and outgoing faxes. (TX means Transmit.) (RX means Receive.)	Fax Journal (activity report)
	5.User Settings	—	—	Lists your settings.	Reports
5.Machine Info.	1.Serial No.	—	—	Lets you check the serial number of your machine.	Checking the serial number
0.Initial Setup	1.Receive Mode	—	Fax Only* Fax/Tel External TAD Manual	Choose the receive mode that best suits your needs.	Choosing the Receive Mode
	2.Date/Time	—	—	Puts the date and time on the LCD and in headings of faxes you send.	See Quick Setup Guide
	3.Station ID	—	Fax: Name:	Set your name and fax number to appear on each page you fax.
	4.Tone/Pulse	—	Tone* Pulse	Choose the dialling mode.
	5.Dial Tone	—	Detection No Detection*	Turns Dial Tone Detection on or off.	Dial Tone detection
	6.Phone Line Set	—	Normal* PBX ISDN	Select the phone line type.	Setting the Phone Line Type

Page Top