Using remote codes

Fax receive code

If you answer a fax call on an extension or external telephone, you can tell your machine to receive it by dialling the fax receive code

5 1. Wait for the chirping sounds then replace the handset. (See Fax Detect.) Your caller will have to press Start to send the fax.

Page Top

Telephone answer code

If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T (double) ring after the initial ring delay. If you pick up the call on an extension phone you can turn the F/T ring off by pressing # 5 1 (make sure you press this between the rings).

Page Top

Changing the remote codes

If you want to use Remote Activation, you have to turn on the remote codes. The preset Fax Receive Code is

5 1. The preset Telephone Answer Code is # 5 1. If you want to, you can replace them with your own codes.

Press Menu, 2, 1, 4.

Setup Receive

Remote Codes

Press

to choose On (or Off).

Press OK.

Enter the new Fax Receive Code.

Press OK.

Enter the new Telephone Answer Code.

Press OK.

Press Stop/Exit.

Note

•	If you are always disconnected when accessing your external TAD remotely, try changing the Fax Receive Code and Telephone Answer Code to another three-digit code using the numbers 0-9, , #.
•	Remote Codes might not work with some telephone systems.

Page Top