Home PrintPrevious Next

Printing Photos

Before you can print an individual image, you have to know the image number.
1
Make sure you have put the memory card or USB Flash memory drive in the correct slot.
Press Graphic (Photo Capture).
2
Print the Index. (See Print Index (Thumbnails).)
3
Press Bsymbol.utri or Bsymbol.dtri to choose Print Photos.
Press OK.
4
Press Bsymbol.utri repeatedly to choose the image number that you want to print from the Index page (Thumbnails).
If you want to choose a two digit number, press Bsymbol.rtri to move the cursor to the next digit.
(For example, enter 1, Bsymbol.rtri, 6 to print image No.16.)
Press OK.
Note Note
Press Bsymbol.dtri to decrease the image number.
5
Repeat step 4 until you have entered all the image numbers that you want to print.
(For example, enter 1, OK, 3, OK, 6, OK to print images No.1, No.3 and No.6.)
Note Note
You can enter up to 12 characters (including commas) for the image numbers you want to print.
6
After you have chosen all the image numbers, press OK again.
7
Press + or - repeatedly to enter the number of copies you want.
8
Do one of the following:
•
Change the print settings. (See PhotoCapture Center™ print settings.)
•
If you do not want to change any settings, press Colour Start to print.
Page Top
Home PrintPrevious Next