Home > Introduction to Your Brother Machine > Control Panel Overview > Assign the Scan Functions to Network Device Scan Buttons 1-3
Assign the Scan Functions to Network Device Scan Buttons 1-3
Assign the following scan to network functions to each Network Device Scan Button if you want to use them as shortcut buttons:
- Scan to FTP/SFTP
- Scan to Network
- Scan to PC (Network Connect)
- WS Scan
- Start your web browser.
- Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).For example:
https://192.168.1.2
- If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd". - Go to the navigation menu, and then click .Start from
, if the navigation menu is not shown on the left side of the screen. - Under Network Device1, click the Type drop-down menu and select the scan function you want to assign to Network Device Scan Button 1.
- Select a profile name from the Destination drop-down list.
- Repeat these steps to configure Network Device Scan Buttons 2 and 3.
- Click Submit.
Did you find the information you needed?