FAQs & Troubleshooting
![]() |
Popular |

SuperGalaxie 3000/3100D
75 Results
1.
How do I thread my machine?
2.
Fabric and Thread
3.
Combination of fabric, thread and needle
4.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
5.
Why does the lower thread keep breaking?
6.
Embroidery
7.
When thread got tangled.
8.
"There is a pattern included that can not be saved to a floppy disk. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?
9.
Where do I put the oil in my machine?
10.
Fabrics and stabilizer material for embroidery
11.
"Set the bobbin holder to the left." message appearing on the LCD. What does it mean and how do I clear it?
12.
"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
13.
"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?
14.
It is difficult to pass the thread through the needle bar thread guide(hook).
15.
How do I create a space between characters?
16.
"Deleting..." message appearing on the LCD. What does it mean?
17.
"The needle is down. Press the needle position button to raise the needle." message appearing on the LCD. What does it mean and how do I clear it?
18.
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
19.
"The bobbin winder safety device has activated. Is the thread tangled?" message appearing on the LCD. What does it mean and how do I clear it?
20.
"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
21.
"Can not change the configuration of the characters." message appearing on the LCD. What does it mean and how do I clear it?
22.
"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?
23.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
24.
How do I remove the presser foot holder?
25.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
26.
Why does my thread keep jamming?
27.
The thread tension is incorrect.
28.
Place a spool of thread on a spool pin.
29.
"Formatting the floppy disk." message appearing on the LCD. What does it mean?
30.
"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" message appearing on the LCD. What does it mean and how do I clear it?