SuperGalaxie 3000/3000C/3000D/3100D
![]() |
FAQs & Troubleshooting |

SuperGalaxie 3000/3100D
Date: 20/03/2015 ID: faqh00000009_000
Embroidery
-
Problem that occurs most in embroidery is misalignment of pattern.
This is caused mostly because a fabric is loose when it's set into an embroidery frame.
Make sure to set a fabric tightly into an embroidery frame so that you may hear a drum-like sound if you tap the set fabric lightly.
-
Use a stabilizer material when you sew thin fabrics, stretch fabrics or fabrics which easily pucker.
Prepare a stabilizer material that is larger than an embroidery frame to be used.
Make sure to attach right surface of stabilizer material to a fabric securely by using an iron.Fusible side of stabilizer
Fabric(wrong side)
- Use Brother embroidery threads and needle 75/11 for embroidery.
EV1, Innov-is 1000, Innov-is 1200, Innov-is 1250, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 4000D/4000, Innov-is 4500, Innov-is 4500D, Innov-is 500D, Innov-is 6700D, Innov-is 6750D, Innov-is 700E, Innov-is 700EII, Innov-is 750D, Innov-is 750E, Innov-is 780D, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 95E, Innov-is 980D, Innov-is 980K, Innov-is 985D, Innov-is BP3600, Innov-is BP3700, Innov-is F440E, Innov-is F540E, Innov-is F580, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is M330E, Innov-is M370, Innov-is M380D, Innov-is NQ3500D, Innov-is NQ3700D, Innov-is NS2750D, Innov-is NV180, Innov-is NV180D, Innov-is NV180K, Innov-is NV18E, Innov-is NV2600, Innov-is NV2700, Innov-is NV800E, Innov-is NV880E, Innov-is V3, Innov-is V3 LE, Innov-is V3 SE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is VE2200, Innov-is VE2300, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, Innov-is XE1, Innov-is XE2, Innov-is XJ1, Innov-is XJ2, Innov-is XP1, Innov-is XP2, Innov-is XP3, Innov-is XV, Innov-is XV8500D, Innov-is XV8550D, LB6950, LB7950, LB8950, PE-150V, PE-190D, PE-300S, PE-770, PE830DL, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN PLUS2, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, SuperGalaxie 3000/3000C/3000D/3100D
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.
Please do not enter contact information or any other personal information here.
(We will not respond to any Feedback you send us.)