31.

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.

32.

"No more patterns can be added to this combination." message appears on the LCD. What does it mean?

33.

How do I raise or lower the feed dogs?

34.

Fabrics and stabilizer material for embroidery

35.

"There is not much thread remaining in the bobbin." message appearing on the LCD. What does it mean and how do I clear it?

36.

"This disk is write protected. Can not save the pattern. Disengage the write protection and save again." message appearing on the LCD. What does it mean and how do I clear it?

37.

"No disk inserted or this disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?

38.

"This button does not operate when the embroidery unit is attached Turn off the power and remove the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?

39.

"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?

40.

"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?

41.

"Retrieving the pattern. Wait a moment." message appearing on the LCD. What does it mean and how do I clear it?

42.

"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?

43.

"Finish editing the pattern before sewing the pattern." message appears on the LCD. What does it mean?

44.

"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.

45.

"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" message appearing on the LCD. What does it mean and how do I clear it?

46.

"Deleting..." message appearing on the LCD. What does it mean?

47.

"Can not read this disk. This disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?

48.

"Can not format this disk. This may be the wrong type of disk, or the disk may be defective. Please change the floppy disk." message appearing on the LCD. What does it mean and how do I clear it?

49.

"Select a pattern." message appearing on the LCD. What does it mean and how do I clear it?

50.

"The needle is down. Press the needle position button to raise the needle." message appearing on the LCD. What does it mean and how do I clear it?

51.

"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?

52.

"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?

53.

"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?

54.

"Data volume is too large for this pattern." message appearing on the LCD. What does it mean and how do I clear it?

55.

Why does the needle keep breaking?

56.

"Set the bobbin holder to the left." message appearing on the LCD. What does it mean and how do I clear it?

57.

"There is a pattern included that can not be saved to a floppy disk. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?

58.

"Can not save to this disk. The disk may be defective. Change the disk and try to save again." message appearing on the LCD. What does it mean and how do I clear it?

59.

"Change to the medium or large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?

60.

"This button does not operate when the embroidery unit is not attached. Turn off the powert and attach the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?