RJ-3230B
 |
Preguntas frecuentes y solución de problemas |
RJ-3230B
Fecha: 02/07/2023 ID: faqp00100553_000
How to change the Media Roll Holder
Make sure you use a Media Roll Holder that supports the core size of your label or paper.
- Push the Roll Cover Release Lever to open the Roll Compartment Cover.
-
Hold the left Roll Guide so that it does not rotate, and then remove the currently installed Media Roll Holder using a flathead screwdriver.
- Hold the right Roll Guide so that it does not rotate, and then remove the currently installed Media Roll Holder using a flathead screwdriver.
-
Attach the Media Roll Holders that match your media's core size to the Roll Guides using a flathead screwdriver. Make sure you use the same size Media Roll Holders.
- Insert the roll.
- Close the Roll Compartment Cover until it locks into place.
- If the LCD automatically shows [Select Media] or [Auto Detect], select the option you want.
- You can check each core size at the center of the Media Roll Holders.
- After closing the roll cover during power-on, the LCD automatically shows [Select Media] or [Auto Detect] setting.
- If the media is misaligned (protruding) with the Media Roll Holder, fix the media before using it.
Si necesita asistencia, contáctese con el servicio al cliente de Brother:
Comentarios sobre el contenido
Para ayudarnos a mejorar el soporte, bríndenos sus comentarios a continuación.
Paso 1: ¿Cómo lo ayudó la información en esta página?
Paso 2: ¿Quiere agregar otros comentarios?
Observe que este formulario solo se utiliza para comentarios.