PJ-622
ЧЗВ и отстраняване на неизправности |
PJ-622
Дата: 25/12/2019 Идентификационен номер: faqp00001469_002
How to install the rechargeable Li-ion Battery (Optional)
Installing the rechargeable Li-ion battery
-
Open the battery cover by pressing the cover latch.
1. Battery cover
2. Cover latch -
Swing the cover open and remove it.
-
Move the slide switches on the rechargeable Li-ion battery inward, and then insert the battery into the battery compartment.
3. Slide switches When installing the rechargeable Li-ion battery, insert the battery removal ribbon into the battery compartment, and then install the battery. The battery removal ribbon is not needed when removing the rechargeable Li-ion battery.
-
Move the slide switches outward to lock the battery in place.
-
The voltage supplied by the rechargeable Li-ion battery fluctuates. The printing speed may also fluctuate depending on the voltage.
- When the rechargeable Li-ion battery is being used, the battery cover will not be needed. Keep it in a safe place so that it will not be lost.
-
The voltage supplied by the rechargeable Li-ion battery fluctuates. The printing speed may also fluctuate depending on the voltage.
Removing the rechargeable Li-ion battery
Move the slide switches on the rechargeable Li-ion battery inward, and then remove the battery from the printer.
1. Slide switches |
Свързани ЧЗВ
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.
Стъпка 1: Как ви помага информацията на тази страница?
Стъпка 2: Искате ли да добавите коментар?
Имайте предвид, че този формуляр се използва само за обратна връзка.